WASHİNG SYSTEM
ÇKR Automatic washing system fulfills the requirements for effective cleaning and disinfection of all kinds of milking systems, respectively, completely and without errors. All you have to do is press a single button. As it is known, post-milking cleaning and disinfection of milking systems is very important. In washing for effective cleaning and disinfection of the milking system:
– Sufficient amount of water should be used
– The water to be used for washing should be of sufficient temperature.
– Detergents such as alkali and acid should be used in the right ratio.
– Washing time should be sufficient
– Pre-rinse-main-wash-final rinse must be done during washing.
– The water circulated in the milking system during washing should be circulated with high pressure.
Related products
CALF FEEDING TROLLEY
TECHNICAL SPECIFICATIONS
Capacity: 200 tons
Motor Power: 0.37 kW (mixer), 9.2 A - 12V (pump motor)
Mobile: Wheeled
Delivery System: Automatic hand system
CALF HUTCHHOUSE
TECHNICAL SPECIFICATIONS
MANUFACTURED FROM 100% POLYETHYLENE MATERIAL.
NEST WIDTH: 125 CM,
NEST HEIGHT: 115 CM,
CALF NEST LENGTH: 165 CM
FENCE WIDTH: 150 CM
FENCE HEIGHT: 90 CM
FREESTALL CUBICLE
TECHNICAL SPECIFICATIONS
Material: Galvanized Dip Pipe
MATERIAL: GALVANIZED IRON,
SIZE: 48 X 3 MM BED IRON
PIPE DIAMETER: 48 X 3 MM GALVANIZED PIPE
CHEST BOARD: 48 X 3 MM GALVANIZED PIPE
ADJUSTABLE: YES
ASSEMBLY/DISASSEMBLY FEATURE: WELD-FREE
ASSEMBLY/DISASSEMBLY THERE IS A FLOOR-MOUNTED STALL SYSTEM FOR EVERY ANIMAL.
HEADLOCK
TECHNICAL SPECIFICATIONS
Material: Hot-Dip Galvanized Pipe
"MATERIAL: HOT-DIP GALVANIZED
DIMENSIONS: 63 X 3 MM GALVANIZED PIPE
PIPE DIAMETER: 63 X 3 MM PIPE THICKNESS
DOUBLE LOCKING MECHANISM MANUFACTURED FROM GALVANIZED PIPE GALVANIZED SHAFT ACCOMPANIES LOCKING WITH A SINGLE LEVER DURING FEEDING.
HELICOPTER FAN
TECHNICAL SPECIFICATIONS
MOTOR TYPE: Reducer
MOTOR POWER: 1.1 kW
NUMBER OF BLADES: 5
WING DIAMETER: 4 m
EFFECTIVE DISTANCE: 8-15 m
RECEIVER GRUP
RUBBER MAT
TECHNICAL SPECIFICATIONS
Material: Rubber
Dimensions: 110x180
Number of layers: 1 piece
SWINGING COW BRUSH
TECHNICAL SPECIFICATIONS
Type: Pendulum type (with gear reducer)
Type: Automatic
Number of brushes: 1
Brush diameter: 40 cm
Motor power: 0.55-0.75 kW
Sensor: Yes
Reviews
There are no reviews yet.